Shipboard Cable
Type "T/N" Signal Cable Power Distribution Unarmored

Part
Number		 AWG Conductors Stranding Insulation Jacket Diameter Description
AWG MM2 IN MM IN MM IN MM
MD-DNI-10 10 5.26 2 7/38.5 0.02 0.51 0.045 1.14 0.43 10.92 2C 10 AWG Type N
MD-DNI-16 8 8.37 2 7/48.6 0.03 0.76 0.06 1.52 0.58 14.73 2C 8AWG Type N
MD-DNI-26 6 13.3 2 7/61.2 0.03 0.76 0.06 1.52 0.65 16.51 2C 6AWG Type N
MD-DNI-3 16 1.31 2 7/19.2 0.019 0.48 0.045 1.14 0.3 7.62 2C 16AWG Type N
MD-DNI-6 12 3.31 2 7/30.5 0.015 0.38 0.045 1.14 0.37 9.4 2C 12AWG Type N
MD-FNI-16 8 8.37 4 7/48.6 0.03 0.76 0.06 1.52 0.66 16.76 4C 8AWG Type N
MD-FNI-3 16 1.31 4 7/19.2 0.019 0.48 0.045 1.14 0.34 8.64 4C 16AWG Type N
MD-FNI-4 14 2.08 4 7/24.2 0.015 0.38 0.045 1.14 0.39 9.91 4C 14AWG Type N
MD-FNI-6 12 3.31 4 7/30.5 0.015 0.38 0.045 1.14 0.43 10.92 4C 12AWG Type N
MD-MNI-10-3 16 1.31 10 7/19.2 0.019 0.48 0.045 1.14 0.5 12.7 10C 16AWG Type N
MD-MNI-14-10 10 5.26 14 19/24.2 0.022 0.56 0.085 2.16 0.915 23.24 14C 10AWG Type N
MD-MNI-7-4 14 2.08 7 7/24.2 0.019 0.48 0.045 1.14 0.44 11.18 7C 14AWG Type N
MD-MNI-7-6 12 3.31 7 19/18.5 0.016 0.41 0.048 1.22 0.495 12.57 7C 12AWG Type N
MD-TNI-10 10 5.26 3 7/38.5 0.02 0.51 0.045 1.14 0.46 11.68 3C 10AWG Type N
MD-TNI-16 8 8.37 3 7/48.6 0.03 0.76 0.06 1.52 0.61 15.49 3C 8AWG Type N
MD-TNI-6 12 3.31 3 7/30.5 0.015 0.38 0.045 1.14 0.39 9.91 3C 12AWG Type N

 

Applications

Cobra’s Type T/N 600 volt cables are suitable for use in commercial marine applications where flame retardant cables having excellent physical and electrical properties are required. The insulation system has a continuous operating temperature of 90°C.

Features

  • IEEE & ABS APPROVED

 

Construction

  • CONDUCTORS - Soft annealed bare copper per ASTM B3 and B8, stranded as shown.
  • INSULATION - Type T/N polyvinyl chloride/nylon meeting specification IEEE 45 (1998), IEEE 1580 (2001) and UL1309/CSA 245. Thickness as shown. Insulated conductors are rated VW-1
  • JACKET - Flame retardant thermoplastic polyvinyl chloride (PVC) is applied over the cable core, (covered with a polyester separator tape) and complies with Type T polyvinyl chloride as required in IEEE 45 (1998) and UL 1309/CSA 245.

 
abs
ieee
rohs
UL Listed
CSA
ABS Approved
IEEE
RoHS Compliant